Sunday, May 14, 2023

How to cut men trouser - 2 Rear Panels

 

  1. Move the cut fabric over the unused raw material
  2. Add 1.5" for the darts to the waist line 

  3.  Add 1" to the height of the pants back panel (remember we took out 1" from the front panel) only the crutch area must be high the other side will be the same. 
  4. Add 1.5" to the crutch line and 2.5 to the front of the Crutch line on the back panel
  5. Connect the lines as shown in pic 
  6. On the in-seam add 2" down towards the ankle and connect the lines
  7. Checkpoint - 
  8. Checkpoint The out-seam cut identical as the Front Panel - only on the in-seam you add 2" to the edge - Cut the 2 Rear panels 
  9. Fold the back panels into 2 and cut a notch  
  10. The front panel make the pocket 2.5" x7" from the corner 

  11. Test

Reference: 


https://www.youtube.com/watch?v=LLnqV_k2vNQ

How to cut men trouser - 2 Front Panels

 How to cut men trouser/pant in less than 15min step by step

General Rule of Thumb  (2 Front Panels)

PreReq

1. Fold the fabric right side in and wrong side out

Marking from top of Waist to bottom of Ankle 

  1. Edge Base Line - Measure 1” from the edge and draw a straight line
  2. Pants Length - Measure Length 35” away from the edge line and draw a straight line
  3. Pants Fold - Measure 2” for the Folding from the length line and draw a straight line
  4. Crutch Length  - Get the Crutch – (Waist Measurement /4) + 1” or 1.5” or 2” 
    • Example 29/4 = 7 ¼” + 1.5” =8.7”  (round up)
    • (based on type of fit, kids add 1” young man 1.5” adult 2”)
    • Measure 8.7” from base line and draw a straight line for the Crutch Line
  5. Method 2 for Crutch depth 
    1. Hip  - Divide the hip by 4 and add 1.5”
    2. (Waist /4) + 1"
    3. Example if 
      1. Length is 40"to 45", then crutch depth is 9.5"
      2. Length is 35"to 39", then crutch depth is 9"
      3. Length is 32" to 34" then crutch depth is 8.5"
  6. Find the Knee = (Crutch Line – Ankle hem line) /2  and add 2” upwards and a straight line

Marking across from Center Line 

  1. Waist - Waist 28/4 + 1.5 for Zipper =9.5” 
  2. Center Line - Find Center line = Crutch /2 = 11.5” /2 =5.7”  - Draw a straight line
  3. Mark the Hem line from Center line 13 /2 = 6.5 /2 =3.1/4”
  4. Mark the Knee line from Center line 16” /2 =8”
  5. Draw the line connecting the edges and cut

General Rule of Thumb  (2 Rear or Back Panels)

  1. Waist Line - Measure 1” from above waist line for back panels and draw a straight line
    1. Add 1.5" for darts and seam allowances
    2. Center of darts is your back pocket
  2. Crutch Line mark 3" up  and at 90 degrees angle mark 1.5" at 45 degrees and draw a curve line
  3. Add 1.5" to the crutch line and 2.5" to the front of the crutch line on the back panels
  4. The out-seam cut identical as front panel - only the in-seam you add 2" to the edge for ankle, knee




https://www.youtube.com/watch?v=PUG9LZZUNZ4





  1. Draw a reference straight line 1" away from the width raw edge
  2. Measure the Length 35" from line and draw a straight line
  3. Measure 2" for the Folding from the length line and draw a straight line
  4. Crutch Hight Formula = (Waist Measurement /4) + 1” or 1.5” or 2”
    • Example  29/4 = 7 ¼” + 1.5” =8.7” 
    • (based on type of fit, kids add 1” young man 1.5” adult 2”)
  5. Measure 8.7” from base line and draw a straight line for the Crutch Line
  6. Divide the hip by 4 and add 1.5”
  7. Waist 28/4 + 1.5 for Zipper =9.5” 
  8. Center Line Formula = Crutch /2 
    1. Example 11.5” /2 = 5.7”  - Draw a straight line
  9. Knee Formula  = (Crutch Line – Ankle hem line) /2  and add 2” upwards and a straight line
  10. Mark the Hem line from Center line 13 /2 = 6.5 /2 =3.1/4”
  11. Mark the Knee line from Center line 16” /2 =8”
  12. Draw the line connecting the edges and cut


Marking and Cutting the 2 Front Panels 

  1. Fold Fabric width - Right side in and Wrong side out. The width is longest measurement which is the thigh /2 + 1"
  2. Draw a straight line on the width corner edge of the fabric (it will be the starting line or the Waist Line 

  3. From the Length measure 1" and mark it with a chalk

  4. Measure 11" from the waist base line which is the Crutch 

  5. Measure 1.5" off the Waist for the Waist band, so you are subtracting it and mark the length

  6. Mark the Length of the pants which is 40" or the ankle measurement

  7. Mark the an additional 2" for the Hem making it 42"

  8. Mark it on the edge parallel to the center measurement 

  9. Use a Straight Edge to Draw a straight line connecting the 2 lines

  10. Mark 2" Inwards from the edge on the Ankle lines 

  11. From there measure the ankle /2 which is 7.5" . The ankle measurement is 15"

  12. Go up and measure the Knee Length with is 22" from the waste line

  13. Mark the Kneel Length on the coroner also and Draw a straight line of the Knee Length 
  14. From the Knee length edge measure off 1.5" 

  15. Then transfer the length of the crutch to the other side and draw a straight line
  16. Then mark it and draw a straight line 
  17. Take the Waist circumference and divide it by 4 mark both the Waist Line and the Crutch Line 
  18. Mark the thigh circumference /2
  19. Draw the curve line 
  20. Use the Curve Rule to draw the crutch line
  21. Checkpoint - You have marked out the crutch outline 
  22. Draw a straight line from the Waist where you take out 1" to the crutch line - this is to enable the pants fits perfectly.
  23. Draw a line connecting the Crutch to the Knee line 
  24. Measure and draw the knee circumference /2 which is 22"/2 is 11"
  25. Mark the Knee measurement  
  26. Connect the Knee measurement to the Crutch 
  27. With a long rule connect the knee with the ankle 
  28. Repeat the process on the backend 
  29. Checkpoint - The Front panel is ready 
  30. Drop the waist line by 1" and join the slant line 
  31.  Ready to cut Keep the crutch material for the Zipper
  32. zipper


Reference: 

https://www.youtube.com/watch?v=LLnqV_k2vNQ



Saturday, April 22, 2023

Boston Chinatown -

 Boston’s Chinatown Restaurants 


1. Empire Garden - 690 Washington Street -Dim Sum is served from 8:30am to 3pm daily. 

                                          https://www.youtube.com/watch?v=yW7I9ZF3MKk


2. Hei La Moon Restaurant (Food Opera) 80 Essex Street Boston
                                       Mon-Fri: 11am-8pm | Sat-Sun: 10am-8pm | P: 617.338.8813


3. China Pearl -  9 Tyler Street, Boston MA, 02111 (617) 426-4338

                                  Quincy Location:
                                  237 Quincy Avenue, Quincy MA, 02169
                                  617-773-9838

Thursday, March 2, 2023

Cassava Pone

Cassava Pone

 

  1. 3 cassava grated  eat two day after taste better
  2. 1/2 can carnation milk
  3. 1/2 sugar
  4. 1small can coconut cream ( organic from whole foods)
  5. 1 1/2 black pepper
  6. 2 tsp vanilla
  7. 1 tsp Nutmeg
  8. 1 tsp cinnamon
  9. Mix really well , place in a buttered Pyrex and bake 350 degrees for 45 min to an hour  toaster oven ( can add 1/2 to one cup grated coconut)